XCMG Parts| Shantui Parts| Liugong Parts| Sunward Parts

XG958N Wheel Loader

XG958N wheel loader

XG958N Wheel Loader

Bucket Capacity:

3.0m³

Operating Weight:

17300kg

Rated Power:

162kw

Product features

 

1, 3300mm long wheelbase, large overturning load, more suitable for heavy load conditions.

2. The unloading height is 3167mm, which is better than similar standard models and has a wide loading range.

3, three and 10s, the operation cycle time is short, high loading efficiency.

5. Optimized bucket structure, high loading rate;Add guide plate to prevent material from falling at high position to damage pin shaft, cab and other parts.

 

Product Parameters

Brand Xiagong  
model XG958N  
tonnage 5 tons  
walk  Tire type  
use General type  
Working mass of the whole machine (kg) 17,250  
Rated bucket capacity (m³) 2.2-4.5  
Rated load (kg) 5000  
engine rated power 162Kw
Rated speed 2000r / min
Machine Transport length 8280mm
performance Transport full width 3000mm
parameters Transport full height 3450mm
Wheelbase 3300mm
Wheelbase 2240mm
Minimum ground clearance 460mm
Bucket width 3000mm
Turning radius (tyre center) 5910mm
Turning radius (outside of bucket in transportation position) 6825mm
Maximum working height (standard bucket) 5555mm
Maximum unloading height 3167mm
Corresponding maximum unloading distance 1198mm
Maximum steering angle 38°
Main Optional capacity 2.2-4.5m³
technical Rated load 5000kg
parameters Overall machine operation quality 17250kg
Forward gear 11.5km/h
Forward gear 38km/h
Back gear 16km/h
Maximum breakout force 175KN
main traction force 160KN
Maximum climbing ability 29°
 
 
 
Exit mobile version