XCMG Parts| Shantui Parts| Liugong Parts| Sunward Parts

XCG100_M Truck Crane

XCT100_M crane

Truck Crane

XCT100_M

Maximum rated lifting capacity(t)

100

Fully-extended boom(m)

58

Engine rated power(KW/rpm)

290

XCT100_M truck crane is widely used for the lifting operations in Oilfields, mines, general engineering projects, such as construction site, urban renewal, communication and transportation, sea ports, bridge construction, desert, and complex working environments.

* 6-section boom of 64 m with U-type profile is adopted; the max. lifting load is 100 t; the max. lifting height is 92.6 m; the max. working radius is 62 m; The performance takes the lead comprehensively.

* Low speed large torque power transmission system, contributes to perfect combination of optimal power and optimal economical efficiency, leading to more than 12% reduction in fuel consumption and 10% improvement in grade ability.

* XCT100 is also the first four-wheel driven truck crane domestically, which can meet the need under various road conditions.Chassis rear hydraulic controlled follow-up steering technology, realizate highway and small turning two steering modes, ensure stable and reliable of vehicle at high speed, travelling at lower speed is flexible.

Specification
Description
Unit
Parameter value
Overall length
mm
15600
Overall width
mm
3000
Overall Height
mm
3870
Wheel Base
mm
1920+3500+1420+1505
Track(front/rear)
mm
2449/2315
Front/Rear overhang
mm
2650/2765
Front/Rear extension
mm
1840/0
Total vehicle mass in travel configuration
kg
55000
Engine rated power
kw/(r/min)
176/2300
190/2200
316/1900
Engine rated torque
N.m/(r/min)
860/1200-1700
1000/1200-1600
2060/1000-1400
Max. travel speed
km/h
90
Min. turning diameter
m
23
Min. ground clearance
mm
326
Max. grade ability
%
45
Approach angle
°
18
Departure angle
°
13
Braking distance (at 30 km/h, full load )
m
≤10
Oil consumption per 100km
L
70
Noise level at seated position
dB(A)
≤90
Exterior noise level
dB(A)
≤88
Exit mobile version