XCMG Parts| Shantui Parts| Liugong Parts| Sunward Parts

SD16 Bulldozer

bulldozer sd16

BULLDOZER

SD16

ENGINE POWER:

131kW/1850rpm

OVERALL WEIGHT

17,000kg (Standard)

ENGINE MODEL

WD10/WP10
Power System

● The installed WP10 electronically controlled engine conforms to the China-III non-road machinery emission regulation, featuring strong power, high efficiency and energy-saving, and low maintenance cost.

● The rated power reaches 131kW, featuring high torque reserve coefficient.

● The radially sealed intake system is applied to effectively prolong the engine life.

 
PARAMETER
Parameter name SD16 (Standard version) SD16C (Coal version) SD16E (Extended version) SD16L(Super-wetland version) SD16R (Environmental sanitation version) SD16D (Desert version)
Performance parameters            
Operating weight (Kg) 17000 17500 17346 18400 18400 18200
Ground pressure (kPa) 58 50 55 25 25 33.2
Engine            
Engine model WD10(China-II)/WP10(China-III) WD10(China-II)/WP10(China-III) WD10(China-II)/WP10(China-III) WD10(China-II)/WP10(China-III) WD10(China-II)/WP10(China-III) WD10(China-II)/WP10(China-III)
Rated power/rated speed (kW/rpm) 131/1850 131/1850 131/1850 131/1850 131/1850 131/1850
Overall dimensions            
Overall dimensions of machine (mm) 5140*3388*3032 5427*3900*3032 5345*3388*3032 5262*4150*3074 5262*4150*3074 5262*4150*3074
Driving performance            
Forward speed (km/h) F1:0-3.29,F2:0-5.82,F3:0-9.63 F1:0-3.29,F2:0-5.82,F3:0-9.63 F1:0-3.29,F2:0-5.82,F3:0-9.63 F1:0-3.29,F2:0-5.82,F3:0-9.63 F1:0-3.29,F2:0-5.82,F3:0-9.63 F1:0-3.29,F2:0-5.82,F3:0-9.63
Reversing speed (km/h) R1:0-4.28,R2:0-7.59,R3:0-12.53 R1:0-4.28,R2:0-7.59,R3:0-12.53 R1:0-4.28,R2:0-7.59,R3:0-12.53 R1:0-4.28,R2:0-7.59,R3:0-12.53 R1:0-4.28,R2:0-7.59,R3:0-12.53 R1:0-4.28,R2:0-7.59,R3:0-12.53
Chassis System            
Center distance of track (mm) 1880 1880 1880 2300 2300 2300
Width of track shoes (mm) 510/560/610 610 560/510/610 1100/950 1100/660 810
Ground length(mm) 2430 2430 2635 2935 2935 2935
Tank capacity            
Fuel tank (L) 315 315 315 315 315 315
Working device            
Blade type Angle Blade, Straight tilting blade and U-shaped Blade Coal blade Angle Blade, Straight tilting blade and U-shaped Blade Straight tilting blade Sanitation blade Straight tilting blade
Digging depth (mm) 540 540 540 485 485 485
Ripper type Three-tooth ripper —— Three-tooth ripper —— —— ——
Ripping depth (mm) 570 —— 570 —— —— ——

Exit mobile version